Current location: Home > Product> Activated Alumina

Active alumina


NameActive alumina

CAS1344-28-1

Molecular FormulaAl2O3

StandardCE or HG/T3927-2007


Activated alumina is an excellent desiccant absorbent for drying a wide variety of liquids and gases. Our activated alumina has been developed with high attrition resistance and crush strength, It has larger water adsorption capacity comparing to molecular sieve at high relative humidity and providing long service life with performance at or below dew point specifications. Activated alumina is widely used in large and small dryers. It is appropriate for use in dehydrating gases in both thermally regenerative and pressure swing adsorption (PSA) process.


Technical Datasheet

Item

Unit

pellet

Diameter

mm

3.0-5.0

4.0-6.0

Al2o3 Content

%

≥94.5

≥94.5

RH=60%Static H20 Adsorption RH=60%

wt/%

≥17.5

≥17.5

Bulk density

g/cm³

≥0.70

≥0.70

Surface Area

/g

≥300

≥300

Pore Volume

cm³/g

≥0.40

≥0.40

Crush Strength

N

≥180

≥200

Abrasion rate

%

≤0.2

≤0.2

Note: The above data is typical value for reference only. We can also design as per customers’ request


Main Application

Super Drying capacity for gases including Acetylene, hydrogen, oxygen, air, nitrogen...etc

For water purification:it has fast purification capacity for water purification treatment especially for fluoride,color,and odor removal ,phosphate removal.


Drying for Liquids: it is more complicated than drying for gases, mainly drying for Aromatic hydrocarbons,Polymer alkenes,Gasoline, kerosene..etc

Used as catalyst:In many industrial catalytic processes, alumina is not only used as catalyst,or Carrier of active component of catalyst.


Packaging:

Steel drum, paper drum,aluminum foil bag or per customer’s request.


Storage:

The product as desiccant cannot be exposed in the open air and should be stored in dry condition with air-proof package.

Leave a message